For commercial operations

Protect the water your business runs on.

Farms, bottlers, estates and remote sites depend on wells that nobody can watch all the time. The Artesian Well Project watches them for you: an alert the moment one stops, a likely cause when flow starts to fall away, and a record of every litre for your licence and your auditors.

Start a pilot How it works

Satellite units on each well, so sites beyond any network are covered. Built on Evalu8 Pro.

Wherever water keeps the work going.

The same units, link and screens work for one borehole behind a farmhouse or hundreds of wells across an estate.

Farms and irrigationLivestockBottled water and drinksFood processingEstates and resortsUtilities and water schemesFish farmsMines and remote sites

What you get.

A well that stops is a reading, not a phone call

No flow, or a unit gone quiet, raises an alert by itself, on the dashboard and on the well’s page, with its history and the last work done on it. When flow starts to fall away rather than stop, Evalu8 Pro suggests the likely cause before it becomes a breakdown.

Your own systems can read open alerts, readings and totals through the API.

Well 38 · North farmirrigation supply

Flow now0 L/minsince 05:12

Usually7.4 L/minlast 7 days

Last report8 minby satellite

AlertNo flow at Well 38

Opened at 05:12, with the first reading of no flow
Wellhead pressure 2.8 bar, as usual
Last work on this well: valve replaced 9 months ago

Water taken, against your licence

Flow readings add up to the volume taken from each well, site and licence, for any period. Set your licence as a target and Evalu8 Pro raises an alert as you approach it, so you can plan before you are over it.

Returns and audits come from readings, with every figure traceable to the wells and the readings behind it.

Water taken this yearNorth farm, 6 wells

182,600 m³of 250,000 m³ licensed · 73%

0 m³250,000 m³

totalflow from the farm’s well units since 1 January, in m³

Alertat the mark: raised when the total passes 225,000 m³, 90% of the licence

Act from anywhere, with a person in charge

Where a well has a remote valve or pump controller, its controls appear as buttons on its page: cut back to stay inside a licence, or close down a leak. Each press asks for confirmation, is logged with who pressed it, and only counts as done when the readings show the change.

The controller keeps its own safety limits, and the site carries on as it is if the link drops.

Well 40 · North farmvalve controller

Set the valveWas fully open · 7.4 L/min

Asked for: valve to 40%[email protected] · 09:14 · confirmed in the dialog
Sent to the controller09:14 · the controller replied “accepted”
Confirmed by the readings09:52 · flow 3.1 L/min, under the 3.5 expected

Fits the way your business already runs.

Remote sites covered

Wells far from any network report by satellite in the same way as the ones next to the office.

Into your own systems

Readings, totals and alerts through the API, for your farm software, ERP or control room.

Grows with you

Add tanks, pumps, meters or sites to the same account, and they appear on every screen at once.

Start with the wells that matter most.

Tell us about your sites: how many wells, where they are, and what you need to know. We will scope a pilot with you: the units, the satellite plan and the screens your team will use.

Units specified for your wells and their pipework
Satellite reporting set up and included
Your wells live in Evalu8 Pro from the first reading

Email us about a pilot About Evalu8 Pro

Or write to[email protected]